Vibro Motors

Vibro Motor


POWER SUPPLY

  • Three-phase from 24V to 690V, 50Hz or 60Hz
  • Single phase 110V 60Hz and 220V 50Hz.
  • All motors are designed for inverter application from 20Hz to base frequency

    • CONFORMITY WITH EUROPEAN DIRECTIVE

  • Low voltage 73/23/EEC
  • EMC 89/336/EEC Machinery Safety Directive 98/37/EEC
  • ATEX 94/9/EEC

    • Mechanical protection IP66 according to EN 60034-5





    Pneumatic Impact Vibrators – P type



    Pneumatic Hammers & Blasters – Ball S type

    The frequency is variable by adjusting the inlet pressure. Rotary ball vibrators “S–type” are available in eight sizes. No maintenance required.

    Pneumatic Hammers & Blasters – Roller OR Type

    Vibration is generated by a rotor which describes an epicycloidal movement inside a steel race. OR vibrators generate a very high frequency with low consumption as compared to the force given.


    Pneumatic Hammers & Blasters – Turbine OT type

    Vibration is generated by a strongly unbalanced turbine which rotates on two oversized ball bearings. OT vibrators develop a high work moment and a high vibration frequency. Vibrations present a large amplitude even with low operating pressure.



    External Pneumatic Piston Vibrators – F Type




    Pneumatic Linear Vibrators With Internal Piston – K type

    The K-series Linear Piston Vibrators are par¬ticularly suitable for conveying, compacting and detach¬ing of bulk solids due to perfectly linear vibrations. They reach optimum results in emptying of bins or as drives for vibrating conveyors or feeders.

    Vibro Motors

    1. FRAME - Aluminium frame from size 10 to 50 and ductile cast iron from size 60 to 90
    2. TERMINAL PLATE - M5 from size 10 to 50 and M6 from size 60 to 90
    3. CABLE GLANDS - Plastic M16 and M20 from size 10 to 50 and metal M25 and M32 from size 60 to 90
    4. FLANGE - Gray cast iron from size 10 to 90
    5. WINDINGS - 2,4,6 and 8 poles three-phase asynchronous motor from size 10 to 90; 2 poles single phase from size 10 to 30. All motors are vacuum impregnated(VPI SYSTEM); PTC thermistore 1300C standard from size 75; Class F (155°C); continuous service S1)
    6. SHAFT - Steel alloy high resistant to stress
    7. ECCENTRIC WEIGHTS - Completely adjustable; the scale express the centrifugal force as a percentage of the maximum centrifugal force.
    8. BEARING - Ball bearing from size 10 to 50 and roller bearing from size 50 (for some types only) to 90 (C3 clearance)
    9. COVER – Aluminium alloy from size 10 to 50 and steel from size 60 to 90. For explosion proof range, all the covers are made of stainless steel.
    10. SURFACE TREATMENT - Polyester epoxy powder painting. Standard colour RAL 2004.

    Pneumatic Impact Vibrators P type

    They generate extremely high impact force and they are particularly suitable for use with silos, hoppers and pipings to avoid the formation for crusts, bridges & rat holes. Advantages –

  • High Impact force
  • Limited air consumption.
  • Lubrication not essential
  • Flame proof.
    • Applications –
  • Pneumatic conveying pipes, silos & hoppers.
  • Filter cleaning.


    • Pneumatic Hammers & Blasters Ball S type

    APPLICATIONS -

  • Bins and hoppers
  • Compacting
  • Separation

    • For activation a 2/2 way eIectrovalve and filtered compressed air are reqiured.

    OPERATING TEMPERATURE -
  • - 20°C → 120°C
  • - 4°F → 250°F


    • Pneu. Hammer & Blasters Roller OR Type

    APPLICATIONS -

  • Bins and hoppers
  • Moulding dies
  • Compacting
  • Separation
  • Foundries

    • For activation a 2/2 way electrovalve and filtered compressed air are required.

    OPERATING TEMPERATURE -
  • - 20°C → 120°C
  • - 4°F → 250°F

    • Pneu. Hammer & Blasters Turbine OT type

    APPLICATIONS -

  • Food ond Pharmacentical Industries
  • Bins and Hoppers
  • Screens

    • For activation a 2/2 way eIectrovalve and filtered compressed air are reqiured.

    OPERATING TEMPERATURE -
  • - 20°C → 120°C
  • - 4°F → 250°F
    • Features
  • Lubrication-free
  • Maintenance-free
  • Low noise level

    • External Pneu. Piston Vibrators – F Type

    The F-series Linear Piston Vibrators are par¬ticularly suitable for conveying, compacting and detach¬ing of bulk solids due to perfectly linear vibrations. They reach optimum results in emptying of bins or as drives for vibrating conveyors or feeders.
    FEATURES & BENEFITS

  • Standard temperature application:
    from -10° C (14° F) to 150° C (300° F)
  • Standard application of F15P:
    from 0° C (32° F) to 100° C (210° F)
  • Explosion-proof and maintenance-free
  • Adjustable frequency and amplitude
  • Wide oscillations
  • Excellent start/stop characteristics
  • Starts in any position
  • Minimum sound emission
  • Low air Consumption

    • Pn.linear Vib. with Internal Piston– K Type

    FEATURES & BENEFITS

  • Standard temperature application:
    from -10° C (14° F) to 150° C (300° F)
  • Standard application of F15P:
    from 0° C (32° F) to 100° C (210° F)
  • Explosion-proof and maintenance-free
  • Adjustable frequency and amplitude
  • Wide oscillations
  • Excellent start/stop characteristics
  • Starts in any position
  • Minimum sound emission
  • Low air Consumption